Printronix ThermaLine Series Defines the starting row for the bar code. Enter a value, Specified

SR	Defines the starting row for the bar code. Enter a value
	ranging from row 1 to one less than the length of the
	form. Character row or dot row is specified based on
	the Scale command (page 4±88), or use the CP.DP
	format (page 4±7).
	Defines the starting column of the bar code. Enter a
	value ranging from column 1 to one less than the width
	of the form. Character column or dot column is
	specified based on the Scale command (page 4±88), or
	use the CP.DP format (page 4±7).
D	The printable character (delimiter) identifying the start
	and finish of the data field. Enter any printable
	character other than a slash (/), the SFCC, or a
	character used within the data.
	The same character must be used at both ends of the
	data field, but it will not print with the data.
data field	Enter the characters for the bar code data. A null data
	field (no characters) is permitted. The length of the
	data field is variable; however, the maximum length is
	usually limited to 32 characters to minimize potential
	reading errors.
	For German I-2/5, however, data length should be
	either 11 or 13.
	For regular I-2/5, an even number of characters is
	required for the interleaving process. Consequently, if
	an odd number of characters are entered in the data
	field, a leading zero is added automatically.
	The characters available for the data field are 0 through
	9 (30 through 39 hex, respectively).
PDF	Optional parameter to enable printing of the human
	readable data field. Enter PDF to print the data field. If
	the parameter is not used, the human readable data is
	not printed.
	This parameter is not allowed if a null data field was
	specified.

5±82 Bar Codes