Printronix ThermaLine Series manual Optional form count parameter specifies, Appropriate number

FC	The optional form count parameter specifies the
	number of copies of the form to print. Enter the
	appropriate number.
	When the last page prints, the IGP/PGL returns to the
	Normal mode automatically. Do not use the form count
	parameter if dynamic data (AFn and BFn parameters),
	incremental data (ICNT or IRST parameters), overlay
	data, or EVFU data are used in the Execute command.
ICNTn	The optional incremental form count. Enter ICNT and
	the Incremental value as described in the Execute
	Incremental Dynamic Data command described on
	page 4±56.
IRSTn	The optional incremental reset count parameter. Enter
	IRST and the reset value as described in the Execute
	Incremental Dynamic Data command described on
	page 4±56.

AFn;(D)ASCII text(D)

The Execute Dynamic Alphanumeric Data command.

Enter the dynamic alphanumeric data during the

Execute Form mode as described in ªExecute Form:

Dynamic Alphanumeric Dataº on page 4±54.

BFn ;(D)data(D) The Execute Dynamic Bar Code Data command. Enter the dynamic bar code data during the Execute Form mode as described in ªExecute Form: Dynamic Bar Code Dataº on page 4±55.

(cc)IAFn;[idir] STEPMASK;[RPTn;] [RSTn;] (D)STARTDATA(D)

The Execute Incremental Dynamic Alphanumeric Data command. Supply the data as described on page 4±57.

(cc)IBFn; [idir] STEPMASK; [RPTn;] [RSTn;](D)STARTDATA(D) The Execute Incremental Dynamic Bar Code Data command. Supply the data as described on page 4±57.

4±52 Commands