Printronix ThermaLine Series manual EAN 8 Command Format, Scb

EAN 8 Command Format

BARCODE

EAN8 [+n]; [VSCAN;] [SCB;] [MAG;] [Hn[.m];] [BFn;] [DARK;] SR;

SC

[(D)data field(D)]

[PDF [;LOC] [;FONT]]

STOP

BARCODE	The Bar Code command; enter BARCODE.
EAN8	Designates bar code type EAN 8; enter EAN8.
+n	Optional parameter to provide a 2± or 5±digit add±on
	code at the end of the bar code data field. Enter a plus
	sign (+) and a value of 2 or 5. The first bar of the
	add±on code is separated by nine modules from the last
	bar of the EAN symbol and a left guard pattern.
	No center or right guard pattern exists.
VSCAN	Optional parameter to orient the bar code structure
	vertically. To select a vertical bar code, enter VSCAN.
	If VSCAN is not entered, the bar code is oriented
	horizontally.
SCB	This option shortens the length of the center guard
	bars, which are normally full length.
MAG	Optional parameter to magnify (horizontally expand)
	the bar code symbol. The magnification default value
	is X1.
	You can also use XR or XRD as defined on page 5±4.
	(You must specify 8 digits for MAG for variable ratio.)
Hn[.m]	Optional parameter to adjust the overall height
	(vertical expansion) of the bar code symbol (including
	the upper and lower 0.1±inch guard bands and any
	human readable data).

Bar Codes 5±59