Create

Purpose Places the IGP/PGL in the Create Form mode, where forms and form elements can be defined using the appropriate commands.

Mode NORMAL

Format (cc)CREATE; [/]formname [;FL] [;DISK]

(cc)

The Special Function Control Character.

CREATE

The Create Form mode command; enter CREATE.

/

The optional debug character to check the program line

 

by line for incorrect parameters and print boundaries

 

using the current page size; enter the slash symbol (/)

 

to debug the program. No checks are made until the

 

completed program is sent to the IGP/PGL for storage

 

(when the form is executed by printing the file with the

 

IGP/PGL program). Then the form name is entered

 

into the directory, and the program is evaluated. If

 

errors are detected, the program will print, line by line

 

(including the error on the line where the error occurs),

 

followed by the error±free sections of the form.

 

Correct all errors and delete the slash. Refer to

 

ªSolving Program Errorsº on page 6±49.

formname

Defines the form name of the form being created. The

 

form name should be no more than 12 characters in

 

length. Refer to page 4±5 for a list of allowable form

 

name characters. If a form is created with the same

 

name as a form already existing in memory, the newly

 

created form will replace the existing form. All future

 

reference to the form (editing, executing, or deleting

 

the form from the directory) must be made using the

 

assigned name.

Commands

4±39

Page 82 Page 84
Page 83
Image 83
Printronix ThermaLine Series manual Create, Format ccCREATE /formname FL Disk, Formname
Page 82 Page 84
Top Page Image Contents