Printronix ThermaLine Series manual Character other than a slash /, the SFCC, or a

d. The information for the data field is entered

	dynamically during the Execute Form Mode.
	(Refer to ªExecute Form: Dynamic Bar Code
	Dataº on page 4±55 in the ªCommandsº
	chapter.) Do not use the data field parameter to
	enter data when the BFn;L parameters are used.
	However, refer to the data field description for
	available characters.
DARK	Optional parameter to produce darker looking bar
	codes. Enter DARK. Refer to ªDark Printingº on page
	4±10 for more information.
SR	Defines the starting row for the bar code. Enter a value
	ranging from row 1 to one less than the length of the
	form. Character row or dot row is specified based on
	the Scale command (page 4±88), or use the CP.DP
	format (page 4±7).
SC	Defines the starting column of the bar code. Enter a
	value ranging from column 1 to one less than the width
	of the form. Character column or dot column is
	specified based on the Scale command (page 4±88), or
	use the CP.DP format (page 4±7).
D	The printable character (delimiter) identifying the start
	and finish of the data field. Enter any printable
	character other than a slash (/), the SFCC, or a
	character used within the data. The same character
	must be used at both ends of the data field, but it will
	not print with the data.
data field	Enter the data for the bar code. A null data field (no
	characters) is not permitted. The data field can contain
	any character including carriage returns and line feeds.
	The length of the data field is variable; however, the
	maximum length is usually limited to1024 bytes to
	minimize potential reading errors.

NOTE: New lines (i.e. carriage returns/line feeds) are allowed in the PDF417 data field and as PDF417 dynamic data field input.

5±96 Bar Codes