Printronix ThermaLine Series manual To use this field, perform the following steps

	To use this field, perform the following steps:
	a.	Enter BF.
	b.	Replace n with a number ranging from 1 to 255
		to identify the bar code field. The SR and SC
		parameters specify the exact location of the bar
		code field identified by n.
	c.	Replace L with a number equaling the total
		number of characters in the field. (The actual
		data provided dynamically during the Execute
		Form Mode can be less than L.)
	d.	The information for the data field is entered
		dynamically during the Execute Form Mode.
		(Refer to ªExecute Form: Dynamic Bar Code
		Dataº on page 4±55 in the ªCommandsº
		chapter.) Do not use the data field parameter to
		enter data when the BFn;L parameters are used.
		However, refer to the data field description for
		available characters.
DARK	Optional parameter to produce darker looking bar
	codes. Enter DARK. Refer to ªDark Printingº on page
	4±10 for more information.
SR	Defines the starting row for the bar code. Enter a value
	ranging from row 1 to one less than the length of the
	form. Character row or dot row is specified based on
	the Scale command (page 4±88), or use the CP.DP
	format (page 4±7).
SC	Defines the starting column of the bar code. Enter a
	value ranging from column 1 to one less than the width
	of the form. Character column or dot column is
	specified based on the Scale command (page 4±88), or
	use the CP.DP format (page 4±7).
D	The printable character (delimiter) identifying the start
	and finish of the data field. Enter any printable

character other than a slash (/), the SFCC, or a character used within the data.

Bar Codes 5±31