PDF417 Command Format

BARCODE

PDF417; [X[D]n;] [Y[D]n;] [(Hn) (Wn);] [ASPECTh:w;] [(Rn) (Cn);] [Sn;][BFn;L;] [DARK;] SR; SC(T)

[(D)data field(D)(T)] STOP (T)

BARCODE

The Bar Code command; enter BARCODE.

PDF417

Designates bar code type PDF417; enter PDF417.

X[D]n

Optional parameter to designate the width of the

 

narrow element in either the default 60 x 72 dots per

 

inch or, if the D is given, in target dots. (The target dot

 

is 300 dpi for the T3308, T3306 and T3304 printer

 

models and 203 dpi for the T3204 printer model.) The

 

default size is 1/60th of an inch.

Y[D]n

Optional parameter to designate the height of the bar

 

code in either the default 60 X 72 dots per inch or, if

 

the D is given, in target dots. (The target dot is 300 dpi

 

for the T3308, T3306 and T3304 printer models and

 

203 dpi for the T3204 printer model.) The default size

 

is 2/72nd of an inch.

Hn

Optional parameter to adjust the overall height of the

 

bar code symbol (including human readable data).

 

Height adjustments are made in 0.1±inch increments;

 

enter H and a value from 4 to 99 to select height

 

adjustments from 0.4 to 9.9 inches. Parameters Wn,

 

Rn, Cn or ASPECT can not be entered if this

 

parameter is used.

Wn

Optional parameter for the maximum width of the

 

symbol based on the narrow element width. Enter Wn;

 

where n is the overall width in tenths of an inch.

 

Parameters Hn, Rn, Cn or ASPECT can not be entered

 

if this parameter is used.

5±94

Bar Codes

Page 232
Image 232
Printronix ThermaLine Series manual XDn, YDn