JVC LT-26C50SU manual „ Pre-set download, „ Direct Rec, When Feature not Available is displayed

Setting up your TV

„Pre-set download

The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.

You can also carry out this function using your VCR controls.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, check that:

•the VCR power is turned on

•the VCR is T-V LINK compatible

•the VCR is connected to the EXT-2 terminal

•the SCART cable is fully wired.

„Direct Rec

“What You See Is What You Record”

You can easily record to VCR the images that you are watching on the TV.

For details, read the manual for your VCR. Use your VCR controls. “DEVICE IS RECORDING” is displayed.

In the following situations, the VCR will stop recording if the TV is turned off, if the TV channel or input is changed, or if the menu is displayed on the TV:

•when recording images from an external device connected to the TV (for example a camcorder)

•when recording a TV channel after it has been unscrambled on a decoder

•when recording a TV channel by using the TV’s output because the VCR’s own tuner cannot properly receive that channel.

You cannot carry out Direct Rec using your TV’s control.

Generally, the VCR cannot record a TV channel that it cannot receive properly on its own tuner, even if you can view that TV channel on the TV. However, some VCRs can record a TV channel by using the TV’s output if that channel can be viewed on the TV. For details, see your VCR instruction manual.

When the VCR is not ready, the following messages are displayed.

ERROR	Cause and
MESSAGE	countermeasure
NO	The VCR is not able to
RECORDING	record.
	Check the VCR.
NO	The TV input is set to EXT-4
RECORDING	or PC. Since the EXT-4
POSSIBLE	picture or PC picture cannot
	be output to EXT-2, DIRECT
	REC is not possible.
NO	The recording device is not
RECORDING,	ready to record. Check the
MEDIA	VCR tape.
PROBLEM
NO	The recording device cannot
RECORDING,	record as it is recording or
DEVICE BUSY	playing. Check the VCR.

Refer to the VCR instruction manual.

12