
Command Groups
General Commands
The General commands are listed in Table A‐4.
Table A-4 General Commands
Command | Function | Mode | Page |
|
|
|
|
configure | Activates global configuration mode | Exec | |
end | Returns to Exec mode | GC, IC | |
exit | Returns to the previous configuration mode, or exits | any | |
| the CLI |
|
|
|
|
|
|
ping | Sends ICMP echo request packets to another node | Exec | |
| on the network |
|
|
|
|
|
|
reset | Restarts the system | Exec | |
show history | Shows the command history buffer | Exec | |
show line | Shows the configuration settings for the console port | Exec |
configure
This command activates Global Configuration mode. You must enter this mode to modify most of
the settings on the access point. You must also enter Global Configuration mode prior to enabling the context modes for Interface Configuration. See “Accessing the CLI” on page A‐1.
Default Setting
None
Command Mode
Exec
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#
Related Commands
end page A‐11
exit page A‐11