Enterasys Networks 9033900-04 manual Radius-server secondary

Command Groups

radius-server secondary

This command specifies the configuration for the secondary RADIUS server.

Syntax

radius-server secondary [address] [key] [port] [port-accounting] [retransmit] [timeout] [timeout-interim]

Use the descriptions of the radius‐server commands to set these parameters for the secondary radius‐server.

Default Setting

See radius‐server address, radius‐server key, radius‐server port, radius‐server port‐accounting, radius‐ server retransmit, radius‐server timeout, radius‐server timeout‐interim.

Command Mode

Global Configuration

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#radius-server secondary address 192.168.1.25 RoamAbout 3000(config)#

A-86