Command Groups
cdp hold-time
This command specifies amount of time in seconds that the AP retains an AP neighbor entry after receiving last Cabletron Discovery Protocol (CDP) hello packet.
Syntax
cdp
<seconds> amount of time to retain AP neighbor entry. Range: 15‐600
Default Setting
180 seconds
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp
RoamAbout 3000(config)#
Related Commands
cdp auto‐enable page A‐111 cdp enable page A‐113 cdp tx‐frequency page A‐115 show cdp page A‐116
