Enterasys Networks 9033900-04 manual CDP Settings

CDP Settings

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#cdp enable

RoamAbout 3000(config)#cdp hold-time 360 RoamAbout 3000(config)#cdp tx-frequency 120 RoamAbout 3000(config)#cdp authentication tC3Jc RoamAbout 3000(config)#exit

RoamAbout 3000#show cdp CDP Global Information

========================================

Global Status	: Enable
Authentication Code	: tC3Jc
Transmit Frequency	:	120	secs
Hold Time	:	360	secs

========================================

RoamAbout 3000#show cdp neighbor CDP Neighbor Information

=================================================================

Last Change Time	: 7 days, 20 hours, 29 minutes, 26 seconds
Last Deletion Time	: 7 days, 20 hours, 28 minutes, 50 seconds
---------------------------------------------------------------------
Neighbor IP Address	: 10.2.191.52
Neighbor MAC Address	: 00-E0-63-BB-93-C2
Time Mark	: 0 days, 0 hours, 0 minutes, 57 seconds
Device Type	: Dot1d Bridge
Description	: Enterasys Networks 6H303-48 Rev 05.05.01 03/14/03--
11:10 ofc	: 14
Port
---------------------------------------------------------------------
Neighbor IP Address	: 10.2.43.200
Neighbor MAC Address	: 00-01-F4-61-9B-F2
Time Mark	: 7 days, 20 hours, 29 minutes, 26 seconds
Device Type	: RoamAbout Wireless Access Point
Description	: RoamAbout AP ; SW version: V3.1.3
Port	: 1

=====================================================================

RoamAbout 3000#show cdp traffic CDP Traffic Information

========================================

Input Packets	: 27283
Output Packets	: 16677
Invalid Version Packets	: 0
Parse Error Packets	: 0
Transmit Error Packets	: 0
Memory Error Packets	: 0

========================================

4-28 Advanced Configuration