TCP / IP Settings
•Web Servers
–HTTP Server allows the access point to be monitored or configured from a browser.
–HTTP Port specifies the port to be used by the Web browser interface.
–HTTPS Server allows you to enable or disable the secure HTTP server on the access point.
–HTTPS Port specifies the UDP port number used for HTTPS/SSL connection to the access pointʹs Web interface.
•Telnet & SSH Settings
Telnet allows you to manage the access point from anywhere in the network. Telnet is not secure from hostile attacks. Therefore, it is recommended to use the Secure Shell (SSH). The SSH protocol uses generated public keys to encrypt all data transfers passing between the access point and SSH‐enabled management station clients and ensures that data traveling over the network arrives unaltered.
–Telnet Server disables or enables the Telnet server. Default: Enabled.
–SSH Server disables or enables the SSH server. Default: Enabled.
–SSH Port Number sets the UDP port for the SSH server. Range: 1‐22, 24‐79, 81‐442, 444‐
2312, 2314‐65535; Default: 22
Notes: SSH Port Number range may vary from range specified here; range varies based on default ports defined on access point and port usage by other applications.
After software upgrade or configuration reset, the SSH server requires approximately five minutes to generate host encryption keys. The SSH server is disabled while the keys are being generated.
RoamAbout Access Point 3000 Configuration Guide
