Enterasys Networks 9033900-04 manual Using Web Management to View CDP Status

Status Information

Using Web Management to View CDP Status

Select CDP Status from the menu.

Using the CLI to Display CDP Status

Use the cdp enable or cdp auto‐enable commands from the general configuration mode to enable the AP to use CDP. Set CDP parameters using the cdp hold‐time, cdp tx‐frequency, and cdp authentication commands. To view the current CDP settings, use the show cdp command from the Exec mode.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout	3000(config)#cdp auto-enable
RoamAbout	3000(config)#cdp hold-time 300
RoamAbout	3000(config)#cdp authentication asdfg
RoamAbout	3000(config)#cdp tx-frequency 120
RoamAbout	3000(config)#exit
RoamAbout	3000#show cdp
CDP Global Information
========================================
Global Status		: Auto Enable
Authentication Code : asdfg
Transmit Frequency		: 120 secs
Hold Time		: 300 secs
========================================
RoamAbout	3000#

RoamAbout Access Point 3000 Configuration Guide 4-81