Command Groups

ssid

This command configures the service set identifier (SSID).

Syntax

ssid string

string is the name of a basic service set supported by the access point. Range: 1 ‐ 32 characters

Default Setting

RoamAbout Default Network Name

Command Mode

Interface Configuration (Wireless)

Interface Configuration (Wireless): VAP

Command Usage

Use this command for the default interface or any of the seven VAPs configurable per radio interface.

Clients that want to connect to the wireless network via an access point must set their SSIDs to the same as that of the access point.

Example

The following example shows setting the service set identifier for the default interface and a VAP.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#interface wireless g

RoamAbout 3000(if-wireless g)#ssid RD-AP#3-G

RoamAbout 3000(if-wireless g)#vap 3

RoamAbout 3000(if-wireless g: VAP[3])#ssid RD-AP#3-GV3

RoamAbout 3000(if-wireless g: VAP[3})#end

RoamAbout 3000(if-wireless g)#

RoamAbout Access Point 3000 Configuration Guide A-129

Page 255
Image 255
Enterasys Networks 9033900-04 manual Ssid