Enterasys Networks 9033900-04 manual RoamAbout Access Point 3000 Configuration Guide A-7

Understanding Command Modes

To enter the Global Configuration mode, enter the command configure in Exec mode. The system prompt changes to “RoamAbout 3000(config)#” which gives you access privilege to all Global Configuration commands.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#

To enter Interface mode, you must enter the “interface ethernet,” or “interface wireless a,” or “interface wireless g” command while in Global Configuration mode. The system prompt changes to “RoamAbout 3000(if‐ethernet)#,” or RoamAbout 3000(if‐wireless a)” indicating that you have access privileges to the associated commands.

You can use the end command to go back a level, or the exit command to go back to the Exec mode.

RoamAbout 3000(config)#interface ethernet

Enter Ethernet configuration commands, one per line.

RoamAbout 3000(if-ethernet)#

RoamAbout 3000(if-ethernet)#end

RoamAbout 3000(config)#

RoamAbout 3000(config)#interface wireless a

Enter Wireless configuration commands, one per line.

RoamAbout 3000(if-wireless a)#

RoamAbout 3000(if-wireless a)#exit

RoamAbout 3000#

To enter the VAP sub‐mode, you must specify the “VAP” command while in either the “interface wireless a,” or “interface wireless g” configuration modes.

RoamAbout 3000(config)#interface wireless a

Enter Wireless configuration commands, one per line.

RoamAbout 3000(if-wireless a)#vap 2

RoamAbout 3000(if-wireless a: VAP[2])#

RoamAbout 3000(if-wireless a: VAP[2])#exit

RoamAbout 3000#

RoamAbout Access Point 3000 Configuration Guide A-7