
Command Groups
beacon-interval
This command configures the rate at which beacon signals are transmitted from the access point.
Syntax
interval is the rate for transmitting beacon signals. Range: 20‐1000 milliseconds.
Default Setting
100
Command Mode
Interface Configuration (Wireless)
Command Usage
The beacon signals allow wireless clients to maintain contact with the access point. They may also carry power‐management information.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout
RoamAbout