Command Groups
interface
This command configures an interface type and enters interface configuration mode.
Syntax
interface <ethernet wireless <a g>
•ethernet is the interface for wired network.
•wireless is the interface for wireless clients.
•a is the 802.11a radio interface.
•g is the 802.11g radio interface.
Default Setting
None
Command Mode
Global Configuration
Examples
To specify the 10/100Base‐TX network interface, enter the following command:
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout
To specify the 802.11a radio interface, enter the following command:
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout
RoamAbout Access Point 3000 Configuration Guide
