Command Groups
svp
This command enables the AP QoS to utilize Spectralink Voice Priority (SVP) mode to give voice packets priority over data packets on the AP. Use the no form to disable SVP mode.
Syntax
svp
no svp
Default Setting
Disable
Command Mode
Global Configuration
Command Usage
Set SVP mode if using Spectralink VoIP phones.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#svp
RoamAbout 3000(config)#
show svp
This command displays the status of SVP mode.
Syntax
show svp
Default Setting
None
Command Mode
Exec
Command Usage
N/A
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)# show svp
SVP: Disabled
RoamAbout 3000(config)#
RoamAbout Access Point 3000 Configuration Guide
