Command Groups
filter ethernet-type protocol
This command sets a filter for a specific Ethernet type. Use the no form to disable filtering for a specific Ethernet type.
Syntax
filter
no filter
protocol is the Ethernet protocol type. (Options: ARP, RARP, Berkeley‐Trailer‐Negotiation, LAN‐Test, X25‐Level‐3, Banyan, CDP, DEC XNS, DEC‐MOP‐Dump‐Load, DEC‐MOP, DEC‐LAT, Ethertalk, Appletalk‐ARP, Novell‐IPX(old), Novell‐IPX(new), EAPOL, Telxon‐TXP, Aironet‐DDP, Enet‐Config‐Test)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Use the filter ethernet‐type enable command to enable filtering for Ethernet types specified in the filtering table, or the no filter ethernet‐type enable command to disable all filtering based on the filtering table.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#filter
RoamAbout 3000(config)#
Related Commands
filter ethernet‐type enable page A‐103
