Command Groups
cdp auto-enable
This command enables this AP to use Cabletron Discovery Protocol (CDP) and to send information about itself when it receives hello packets.
Syntax
cdp
Default Setting
Auto
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp
RoamAbout 3000(config)#
Related Commands
cdp authentication page A‐110 cdp disable page A‐112
cdp hold‐time page A‐114 show cdp page A‐116
RoamAbout Access Point 3000 Configuration Guide