Initial Configuration Steps
7.Enable Management VLAN.
a.Type management‐vlanid and specify a management vlanid.
b.Type management‐vlan enable, and reset the access point.
Note: Before enabling the VLAN feature on the access point, you must set up the network switch port to support tagged VLAN packets from the access point. The switch port must also be configured to accept the access point’s management VLAN ID and native VLAN IDs. Otherwise, connectivity to the access point will be lost when you enable the VLAN feature.
RoamAbout
RoamAbout
Reboot system now? <y/n>:y
Username: admin
Password:********
8.Go to Chapter 4 for advanced configuration.
Using Web Management
To use the Web interface to minimally configure the access point, follow these steps:
1.Open a Web browser and enter the access point’s IP address in the address field:
–If your access point uses a DHCP assigned IP address, make sure the access point is connected to your network and enter the DHCP assigned IP address in your browser’s address field (use your DHCP server or other utility to determine the access point’s IP address).
–If your access point uses a static IP address, connect a system to the access point’s Ethernet port and enter the default IP address: http://192.168.1.1/ in your browser’s address field.
The access point’s Login window appears.
2.Enter the username admin and the password password and click LOGIN (for more information about the username and password, refer to Chapter 4).
