Administration
•Change Username/Password A username and password are required to configure the access point. Enterasys Networks strongly recommends that you change your password from the default value to ensure network security.
–Username is the name of the user. The default name is “admin”. Length: 3‐16 characters, case sensitive.
–New Password is the password for management access. Length: 3‐16 characters, case sensitive.
–Confirm New Password requires you to re‐enter the password for verification.
•Reset Username/Password
Restore from default resets the username and/or the password back to the default settings. The default username is admin and the default password is password.
Using the CLI
Use the username and password commands from the CLI configuration mode.
RoamAbout 3000(config)#username John
RoamAbout 3000(config)#password ****
RoamAbout 3000(config)#confirm password ****
RoamAbout 3000(config)#exit
RoamAbout 3000#
Enabling Disabling Com Port
Using Web Management
Com Port Status radio buttons disable or enable the AP’s com port. Default: Enable
Using the CLI
Use the com‐port command from the Global Configuration mode.
RoamAbout
RoamAbout
RoamAbout 3000(config)#exit
RoamAbout 3000#
