Command Groups
show interface ethernet
This command displays the status for the Ethernet interface.
Syntax
show interface [ethernet]
Default Setting
Ethernet interface
Command Mode
Exec
Example
RoamAbout 3000#show interface ethernet Ethernet Interface Information
========================================
IP Address | : 192.168.1.2 |
Subnet Mask | : 255.255.255.0 |
Default Gateway | : 192.168.1.3 |
Primary DNS | : 192.168.1.55 |
Secondary DNS | : 10.1.0.55 |
Admin status | : Up |
Operational status | : Up |
Untagged VlanId | : 1 |
========================================
RoamAbout 3000#
RoamAbout Access Point 3000 Configuration Guide
