Command Groups
reset
This command resets the access point back to the factory default settings, and restarts the system.
Syntax
reset <board configuration>
•board reboots the system and retains your configuration settings
•configuration resets the configuration settings to the factory defaults, and then reboots the system
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power‐On Self‐Test.
Example
This example shows how to reset the system:
RoamAbout 3000#reset board
Reboot system now? <y/n>: y
Username:
RoamAbout Access Point 3000 Configuration Guide
