Command Groups
radius-server timeout
This command sets the interval between transmitting authentication requests to the RADIUS server.
Syntax
•secondary is the secondary server.
•number_of_seconds is the number of seconds the access point waits for a reply before re‐ sending a request. Range: 1‐60
Default Setting
5
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
radius-server timeout-interim
This command sets the interval to send accounting updates from the access point to the server for this session. This value can be overridden by the RADIUS server.
Syntax
•secondary is the secondary server.
•number_of_seconds is the number of seconds the access point waits for a reply before re‐ sending a request. Range: 60 seconds (one minute) to 86400 seconds (one day)
Default Setting
3600 seconds (one hour).
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
RoamAbout Access Point 3000 Configuration Guide
