Command Groups
sntp-server ip
This command sets the IP address of the servers to which SNTP time requests are issued. Use this command with no arguments to clear all time servers from the current list.
Syntax
•1 ‐ First time server
•2 ‐ Second time server
•ip address is the IP address of an time server (NTP or SNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp‐server enable command, the sntp‐server ip command specifies the time servers from which the access point polls for time updates. The access point will poll the time servers in the order specified until a response is received.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
Related Commands
sntp‐server enable page A‐40 show sntp page A‐43
RoamAbout Access Point 3000 Configuration Guide
