Enterasys Networks 9033900-04 manual Table A-9 Snmp Commands Function Mode

Command Groups

SNMP Commands

The access point includes an on‐board agent that supports Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. Access to the on‐board agent using SNMP v1 and v2c is controlled by community strings. To communicate with the access point, a management station must first submit a valid community string for authentication.

Access to the access point using SNMP v3 provides additional security features that cover message integrity, authentication, and encryption; as well as controlling notifications that are sent to specified user targets.

Table A‐9 lists the SNMP commands to control access to this access point from management stations using (SNMP), as well as the hosts that will receive trap messages.

Table A-9 SNMP Commands

Command	Function	Mode	Page
snmp-server community	Sets up the community access string to	GC	A-58
	permit access to SNMP commands
snmp-server contact	Sets the system contact string	GC	A-59
snmp-server enable server	Enables SNMP service and traps	GC	A-60
snmp-server host	Specifies the recipient of an SNMP	GC	A-61
	notification operation
snmp-server location	Sets the system location string	GC	A-62
show snmp	Displays the status of SNMP	Exec	A-63
	communications
snmp-server trap	Enables specific SNMP notifications	GC	A-64
snmp-server engine id	Sets the engine ID for SNMP v3	GC	A-66
snmp-server user	Sets the name of the SNMP v3 user	GC	A-67
snmp-server targets	Configures SNMP v3 notification targets	GC	A-69
snmp-server filter	Configures filters to send or suppress	GC	A-70
	notifications from specified OID subtrees
snmp-server filter-	Assigns the targets for which filters	GC	A-71
assignments	control notifications to send
snmp-server group	Sets the SNMPv3 group profile	GC	A-72
show snmp groups	Displays the pre-defined SNMP v3	Exec	A-73
	groups
show snmp users	Displays SNMP v3 user settings	Exec	A-74
show snmp group-assignments	Displays the assignment of users to	Exec	A-74
	SNMP v3 groups
show snmp target	Displays the SNMP v3 notification	Exec	A-75
	targets
show snmp filter	Displays SNMP filters	GC	A-75
shown snmp filter-	Displays targets associated with SNMP	GC	A-76
assignments	filters

RoamAbout Access Point 3000 Configuration Guide A-57