Enterasys Networks 9033900-04 manual 802.1x session-timeout

Command Groups

802.1x session-timeout

This command sets the time period after which a connected client must be re‐authenticate. Use the no form to disable 802.1x re‐authentication.

Syntax

802.1x session-timeout <seconds> no 802.1x session-timeout

seconds is the number of seconds. Range: 0‐65535

Default Setting

0 (Disabled)

Command Mode

Interface Configuration (Wireless)

Interface Configuration (Wireless): VAP

Command Usage

Use this command for the default interface or any of the seven VAPs configurable per radio interface.

Example

The following example shows setting 802.1x session‐timeout for the default interface and a VAP

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#interface wireless a

Enter Wireless configuration commands, one per line. RoamAbout 3000(if-wireless a)#802.1x session-timeout 300 RoamAbout 3000(if-wireless a)#vap 2

RoamAbout 3000(if-wireless a: VAP[2])#802.1x session-timeout 300

RoamAbout 3000(if-wireless a: VAP[2])#

RoamAbout 3000(if-wireless a: VAP[2])#exit RoamAbout 3000#

Related Commands

show interface wireless page A‐151

802.1x page A‐89

802.1x session‐key‐refresh‐rate page A‐92

RoamAbout Access Point 3000 Configuration Guide A-93