Command Groups
system contact
This command is used to specify an administrator responsible for the system.
Syntax
system contact name no system contact
name is the name of the contact. Maximum length: 255 characters
Default Setting
Blank
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#system contact IT x9111
RoamAbout 3000(config)#
system location
This command specifies the physical system location.
Syntax
system location location no system location
location is the physical location. Maximum length: 255 characters
Default Setting
Blank
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#system location Third Floor South Hall
RoamAbout 3000(config)#
RoamAbout Access Point 3000 Configuration Guide
