Command Groups
rogue-ap radius
This command enables the access point to perform a RADIUS server look up of the MAC addresses of all access points it finds during a scan and to identify rogue APs whose MAC addresses are not listed in the RADIUS server.
Syntax
enable causes the AP to look up MAC addresses in the RADIUS server and thus to identify rogue APs as APs whose MAC addresses do not exist in the RADIUS server.
Default Setting
None
Command Usage
N/A
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
Related Commands
rogue‐ap enable page A‐159
rogue‐ap [interface‐a interface‐g] scan page A‐163 rogue‐ap scan page A‐165
