Command Groups
snmp-server engine-id
This command is used for SNMP v3. It is used to uniquely identify the access point among all access points in the network. Use the no form to delete the engine ID.
Syntax
engine‐id ‐ Enter the engine‐id in hexadecimal (5 ‐32 characters).
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
•This command is used in conjunction with the snmp‐server user command.
•Entering this command invalidates all engine IDs that have been previously configured.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z RoamAbout
