Command Groups
show line
This command displays the console port’s configuration settings.
Syntax
show line
Default Setting
None
Command Mode
Exec
Example
The console port settings are fixed at the values shown below.
RoamAbout 3000#show line Console Line Information
======================================================
databits | : 8 | |
parity | : none | |
speed | : | 9600 |
stop bits | : | 1 |
======================================================
RoamAbout 3000#
Note: The Initial Configuration section of the Access Point 3000 Hardware Installation Guide describes how to configure terminal emulation software to connect to the Access Point through the console port.
RoamAbout Access Point 3000 Configuration Guide
