Command Groups
cdp authentication
This command specifies an authentication key to use for Cabletron Discovery Protocol (CDP) packets. Use the no form to remove an authentication key.
Syntax
cdp authentication <authentication code> no
authentication code a character string up to 16 bytes to use as an authentication key for CDP packets.
Default Setting
None
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp authentication asdfg
RoamAbout 3000(config)#
Related Commands
cdp auto‐enable page A‐111
cdp enable page A‐113
