Enterasys Networks 9033900-04 manual Radius-server port-accounting, Radius-server retransmit

Command Groups

radius-server port-accounting

This command enables or disables the RADIUS server port for accounting packets and sets the port number.

Syntax

radius-serverport-accounting<port_number> <enable disable>

•port_number is the RADIUS server UDP port used for accounting packets. Range: 0 (disabled), 1024‐65535

•<enable disable> enables or disables the use of the accounting port

Default Setting

Port number: 1813

Disable

Command Mode

Global Configuration

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#radius-server port-accounting 1813

RoamAbout 3000(config)#radius-server port-accounting enable

RoamAbout 3000(config)#

radius-server retransmit

This command sets the number of retries.

Syntax

radius-server [secondary] retransmit number_of_retries

•secondary is the secondary server.

•number_of_retries is the number of times the access point will try to authenticate logon access via the RADIUS server. Range: 1 ‐ 30

Default Setting

3

Command Mode

Global Configuration

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#radius-server retransmit 5

RoamAbout 3000(config)#

A-84