Enterasys Networks 9033900-04 manual Event Logging

Command Groups

Table A-5 System Management Commands (continued)

Command	Function	Mode	Page
ip telnet-server	Enables Telnet access to this access	GC	A-30
	point.
Event Logging	Controls logging of error messages
logging on	Controls logging of error messages	GC	A-31
logging host	Adds a syslog server host IP address that	GC	A-31
	will receive logging messages
logging console	Initiates logging of error messages to the	GC	A-33
	console
logging level	Defines the minimum severity level for	GC	A-34
	event logging
logging facility-type	Sets the facility type for remote logging of	GC	A-35
	syslog messages
show logging	Displays the state of logging	Exec	A-36
show events	Displays all messages recorded in the	Exec	A-37
	event log
logging clear	Clears the event log of all messages.	GC	A-38
System Clock	Sets the system clock via an NTP/SNTP
	server
sntp-server ip	Specifies one or more time servers	GC	A-39
sntp-server enable	Accepts time from the specified time	GC	A-40
	servers
sntp-server date-time	Manually sets the system date and time	GC	A-41
sntp-server daylight-	Sets the start and end dates for daylight	GC	A-42
saving	savings time
sntp-server timezone	Sets the time zone for the access point’s	GC	A-43
	internal clock
show sntp	Shows current SNTP configuration	Exec	A-43
	settings
System Status	Displays system configuration and version
	information
show system	Displays system information	Exec	A-44
show version	Displays version information for the	Exec	A-45
	system

RoamAbout Access Point 3000 Configuration Guide A-17