Enterasys Networks 9033900-04 manual Radius-server port

Command Groups

radius-server port

This command sets the RADIUS authentication port.

Syntax

radius-server [secondary] port <port_number>

•secondary is the secondary server.

•port_number is the RADIUS server UDP port used for authentication messages. Range: 1024‐ 65535

Default Setting

1812

Command Mode

Global Configuration

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#radius-server port 1024

RoamAbout 3000(config)#

RoamAbout Access Point 3000 Configuration Guide A-83