
Command Groups
snmp-server enable server
This command enables SNMP management access and also enables this device to send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and trap messages.
Syntax
no
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
•This command enables both authentication failure notifications and link‐up‐down notifications.
•The snmp‐server host command specifies the host device that will receive SNMP notifications.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
Related Commands
snmp‐server host page A‐61