Command Groups
Table
Command | Function | Mode | Page |
|
|
|
|
ssid | Configures the service set identifier | ||
|
|
| |
Configures the rate at which beacon | |||
| signals are transmitted from the access |
|
|
| point |
|
|
| Configures the rate at which stations in | ||
| sleep mode must wake up to receive |
|
|
| broadcast/multicast transmissions |
|
|
Configures the minimum packet size that | |||
| can be fragmented |
|
|
preamble | Sets the preamble length to long or short | ||
Enables or disables IBSS Relay per | |||
| interface or VAP |
| |
| Sets the packet size threshold at which |
| |
| an RTS must be sent to the receiving |
|
|
| station prior to the sending station |
|
|
| starting communications |
|
|
authentication | Defines the 802.11 authentication type | ||
| allowed by the access point |
| |
encryption | Defines whether or not WEP encryption | ||
| is used to provide privacy for wireless |
| |
| communications |
|
|
key | Sets the keys used for WEP encryption | ||
| Sets the index of the key to be used for | ||
| encrypting data frames sent between the |
| |
| access point and wireless clients |
|
|
Adjusts the power of the radio signals | |||
| transmitted from the access point |
|
|
| Configures the maximum number of | ||
| clients that can be associated with the |
| |
| access point at the same time |
|
|
Identifies the speed that you want to | |||
| support for multicast traffic. |
|
|
| This command defines the cipher | ||
| algorithm used for broadcasting and |
| |
| multicasting when using |
|
|
| Access (WPA) security. |
|
|
| Defines the cipher algorithm used for | ||
| communicating over a network between |
|
|
| the access point and a client. |
|
|
| Defines whether WPA is required or | ||
| optionally supported for client stations |
|
RoamAbout Access Point 3000 Configuration Guide
