Command Groups
cdp tx-frequency
This command specifies the frequency at which this AP transmits Cabletron Discovery Protocol (CDP) hello packets. Default: 60
Syntax
cdp
<seconds> amount of time betwen AP tramission. Range: 5‐900
Default Setting
60 seconds
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp
RoamAbout 3000(config)#
Related Commands
cdp auto‐enable page A‐111 cdp enable page A‐113 cdp hold‐time page A‐114 show cdp page A‐116
RoamAbout Access Point 3000 Configuration Guide
