Command Groups
802.1x supplicant
This command enables or disables supplicant support, and sets the username and password used by the access point to authenticate with the network.
Syntax
802.1x supplicant user
802.1x supplicant no 802.1x supplicant
user specifies the 802.1x supplicant username and password to use for the access point. Range: 1‐32 characters for each
Default Setting
None
Command Mode
Global Configuration
Command Usage
Note: You must specify the username and password that the access point uses as an 802.1x supplicant before you can enable the access point as an 802.1x supplicant.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#802.1x supplicant user
User
Confirm
RoamAbout 3000(config)#802.1x supplicant
RoamAbout 3000(config)#
