Command Groups
802.1x session-key-refresh-rate
This command sets the interval at which unicast session keys are refreshed for associated stations using dynamic keying.
Syntax
802.1x
rate is the interval at which the access point refreshes a session key. Range: 0 ‐ 1440 minutes
Default Setting
0 (Disabled)
Command Mode
Interface Configuration (Wireless)
Interface Configuration (Wireless): VAP
Command Usage
•Use this command for the default interface or any of the seven VAPs configurable per radio interface.
•Session keys are unique to each client, and are used to authenticate a client connection, and correlate traffic passing between a specific client and the access point.
Example
The following example shows setting the 802.1x session key refresh rate for the default interface and a VAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout
RoamAbout
RoamAbout
Related Commands
show interface wireless page A‐151
802.1x page A‐89
802.1x session‐timeout page A‐93
