Enterasys Networks 9033900-04 manual Supported

Security

To display the current settings, use the show interface wireless <ag> <vap#> command from the Exec mode.

RoamAbout 3000#show interface wireless a 1 Wireless Interface Information

===========================================================

----------------Identification-----------------------------
Description	: RD-AP#3
SSID	: r&d
Turbo Mode	: OFF
Channel	: 149 (AUTO)
Status	: Enable
----------------802.11 Parameters--------------------------
Transmit Power	: FULL (20 dBm)
Maximum Tx Data Rate	: 54Mbps
Multicast Data Rate	: 6Mbps
Fragmentation Threshold	: 2346 bytes
RTS Threshold	: 2347 bytes
Beacon Interval	: 100 TUs
DTIM Interval	: 2 beacons
Preamble Length	: LONG
Maximum Association	: 255 stations
Native VLAN ID	: 1
VLAN State	: DISABLED
----------------Security-----------------------------------	: ENABLED
Secure Access
Multicast cipher	: WEP
Unicast cipher	: TKIP
WPA clients	: Not-supported
WPA Key Mgmt Mode	: DYNAMIC
WPA PSK Key Type	: HEX
Encryption	: 64-BIT ENCRYPTION
Default Transmit Key	: 1	Key 2: EMPTY
Common Static Keys	: Key 1: EMPTY
Authentication Type	Key 3: EMPTY	Key 4: EMPTY
	: OPEN
----------------Authentication Parameters--------------------------------
802.1x	: SUPPORTED
Broadcast Key Refresh Rate	: 5 min
Session Key Refresh Rate	: 5 min

802.1x Session Timeout Value : 300 min

RoamAbout Access Point 3000 Configuration Guide 4-69