Command Groups
sntp-server enable
This command enables SNTP client requests for time synchronization with NTP or SNTP time servers specified by the sntp‐server ip command. Use the no form to disable SNTP client requests.
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record accurate dates and times for log events. Without SNTP, the access point only records the time starting from the factory default set at the last bootup (i.e., 00:14:00, January 1, 1970).
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
RoamAbout 3000(config)#
Related Commands
sntp‐server ip page A‐39 show sntp page A‐43
