Enterasys Networks 9033900-04 manual Mac-access entry

Command Groups

mac-access entry

This command adds a MAC address to the local MAC database on the AP and sets the permission for that address to allowed or denied. This command also changes the permission of a MAC address already in the database, or deletes a MAC address from the database.

Syntax

mac-access entry <mac-address><allowed delete denied>

•mac‐address is the physical address of client. Enter six pairs of hexadecimal digits separated by hyphens; e.g., 00‐01‐F4‐12‐AB‐89.

•allowed ‐ Entry is allowed access.

•delete ‐ entry is removed from the local MAC database

•denied ‐ Entry is denied access.

Default Setting

None

Command Mode

Interface Configuration (Wireless)

Interface Configuration (Wireless): VAP

Command Usage

•Use this command for the default interface or any of the seven VAPs configurable per radio interface.

•The access point supports up to 1024 MAC addresses.

Example

The following example shows setting mac‐access entry for the default interface and a VAP.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#interface wireless g

Enter Wireless configuration commands, one per line.

RoamAbout 3000(if-wireless g)#mac-access entry 00-01-f4-cc-99-1a allowed RoamAbout 3000(if-wireless g)#mac-access entry 00-01-f4-cc-99-1a denied

This MAC address 00-01-f4-cc-99-1a filter permission status has been changed !! RoamAbout 3000(if-wireless g)# mac-access entry 00-01-f4-cc-99-1a delete RoamAbout 3000(if-wireless g)#vap 4

RoamAbout 3000(if-wireless g: VAP[4])#mac-access entry 00-01-ff-cc-99 allowed

RoamAbout 3000(if-wireless g: VAP[4])#end RoamAbout 3000(if-wireless g)#

Related Commands

mac‐access permission page A‐95

show authentication page A‐100

A-96