Command Groups
show snmp
This command displays the SNMP configuration settings.
Syntax
show snmp
Default Setting
None
Command Mode
Exec
Example
RoamAbout 3000#show snmp
SNMP Information
==============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
EngineId :80:00:07:e5:80:00:00:31:d2:00:00:00:16
EngineBoots:17
Trap Destinations:
1:10.1.19.23, Community: *****, State: Enabled
2:0.0.0.0, Community: *****, State: Disabled
3:0.0.0.0, Community: *****, State: Disabled
4:0.0.0.0, Community: *****, State: Disabled
dot11InterfaceAFail | Enabled | dot11InterfaceGFail | Enabled |
dot11StationAssociation | Enabled | dot11StationAuthentication | Enabled |
dot11StationReAssociation | Enabled | dot11StationRequestFail | Enabled |
dot1xAuthFail | Enabled | dot1xAuthNotInitiated | Enabled |
dot1xAuthSuccess | Enabled | dot1xMacAddrAuthFail | Enabled |
dot1xMacAddrAuthSuccess | Enabled | iappContextDataSent | Enabled |
iappStationRoamedFrom | Enabled | iappStationRoamedTo | Enabled |
localMacAddrAuthFail | Enabled | localMacAddrAuthSuccess | Enabled |
pppLogonFail | Enabled | sntpServerFail | Enabled |
radiusServerChanged | Enabled | systemDown | Enabled |
systemUp | Enabled |
|
|
=============================================
RoamAbout 3000#
RoamAbout Access Point 3000 Configuration Guide