Enterasys Networks 9033900-04 manual Management-vlan

Command Groups

management-vlan

This command enables the management VLAN ID for the access point. Use the no form to disable the management VLAN.

Syntax

management-vlan enable no management-vlan

Default Setting

Disable

Command Mode

Global Configuration

Command Usage

•The management VLAN is for managing the access point. For example, the access point allows traffic that is tagged with the specified VLAN to manage the access point via remote management, SSH, SNMP, Telnet, and so on.

•Changing the VLAN status of the access point requires a system reboot.

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#management-vlan enable

Reboot system now? <y/n>: n

VLAN functionality will not take effect until the next reset occurs!! RoamAbout 3000(if-wireless a)#

Related Commands

management‐vlanid page A‐173

A-172