Enterasys Networks 9033900-04 manual Rogue-ap enable

Command Groups

rogue-ap enable

This command enables rogue AP on the 802.11a or 802.11g interfaces. Use the no version of this command to disable the rogue AP feature.

Syntax

rogue-ap [interface-a interface-g] enable no rogue-ap [interface-a interface-g]

Default Setting

None

Command Mode

Global Configuration

Command Usage

N/A

Example

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z RoamAbout 3000(config)#rogue-ap interface-a enable

configure either syslog or trap or both to receive the rogue APs detected.

Related Commands

N/A

RoamAbout Access Point 3000 Configuration Guide A-159