
Command Groups
sntp-server date-time
This command sets the system clock.
Notes:
• The SNTP server must be disabled to set the date and time.
• The date and time is not saved after a reset.
Default Setting
00:00:00, January 1, 1970
Command Mode
Global Configuration
Example
This example sets the system clock to 14:37 January 18, 2004:
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout
Enter
Enter
Enter
Enter
Enter
RoamAbout 3000(config)#
Related Commands
sntp‐server enable page A‐40
RoamAbout Access Point 3000 Configuration Guide