Command Groups
show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless <a g> <vap#>
•a is the 802.11a radio interface
•g is the 802.11g radio interface
•vap# is the vap on the a or g radio interface that you want to view
Default Setting
None
Command Mode
Exec
Example
RoamAbout 3000#show interface wireless g
Wireless Interface Information
===========================================================
Description | : | RoamAbout AP3000 - 802.11 b/g |
SSID | : | |
802.11g band | : | 802.11g |
Channel | : | 1 |
Status | : Enable | |
Transmit Power | : HALF (13 dBM) | |
Maximum Tx Data Rate | : | 36 Mbps |
Multicast Data Rate | : | 11 Mps |
Fragmentation Threshold | : | 512 bytes |
RTS Threshold | : | 256 bytes |
Beacon Interval | : | 150 ms |
DTIM Interval | : | 100 beacons |
Maximum Association | : | 32 stations |
Native VLAN ID | : | 1 |
VLAN State | : DISABLED | |
Secure Access | ||
Multicast cipher | : TKIP | |
Unicast cipher | : TKIP | |
WPA clients | : Required | |
WPA Key Mgmt Mode | : Preshared key | |
WPA PSK Key Type | : Alphanumeric | |
Encryption | : |
|
Default Transmit Key | : | 3 |
Static Keys : |
| Key 3: ***** Key 4: EMPTY |
Key 1: EMPTY Key 2: EMPTY | ||
Authentication Type | : | OPEN |
===========================================================
RoamAbout 3000#
RoamAbout Access Point 3000 Configuration Guide
